Posters
PO001: Model testing of a multi-use North Sea farm; combining offshore wind turbines with floating solar panels and seaweed farming.
Floor Spaargaren, Project Manager, MARIN - Maritime Research Institute Netherlands
Environmental impacts, social acceptance & spatial planning
PO002: Innovative decommissioning and upgrading concepts for offshore wind farms
Wei He, Principal Engineer, Equinor ASA
Environmental impacts, social acceptance & spatial planning
PO004: Guidelines and good practices of Environmental Licensing for the establishment of offshore wind farms in Brazil
Mario González, Researcher, Federal University of Rio Grande do Norte
Environmental impacts, social acceptance & spatial planning
PO006: A framework for Early Contractor Involvement in offshore wind
Willems Willems, Managing Director, Vuentica
Environmental impacts, social acceptance & spatial planning
PO007: Use of elastomerics to reduce environmental impact and improve performance of moored monitoring systems
David Aubrey, PhD, CEO, EOM Offshore LLC
Environmental impacts, social acceptance & spatial planning
PO008: Automatic Intelligent Eagle Detection, Deterrent and Blade-Event Monitoring [Poster award winner]
Dr. Roberto Albertani, PhD, Professor, Oregon State University
Environmental impacts, social acceptance & spatial planning
PO009: Socio-environmental impacts of the offshore wind farms in Europe
Researcher Rafael Vasconcelos, MSc, Federal University of Rio Grande do Norte
Environmental impacts, social acceptance & spatial planning
PO010: A Morphodynamic Study of the Irish Sector of the Irish Sea
Dr. Mark Coughlan, Post Doctoral Research Fellow/Senior Marine Geoscientist , Gavin and Doherty Geoslutions Ltd
Environmental impacts, social acceptance & spatial planning
PO011: The Portuguese offshore energy cluster
Ana Pego, Phd, Researcher, Nova University
Environmental impacts, social acceptance & spatial planning
.jpg)
PO012: Past, present and future conditions for Marine Spatial Planning
Raúl Guanche García, PhD, MsC, Head of the Offshore Engineering and Ocean Energy Group, Environmental Hydraulics Institute of Cantabria (IHCantabria)
Environmental impacts, social acceptance & spatial planning
PO013: Combining survey techniques to improve UXO characterisation
Anne Chabert, Chief Geophysicist, Fugro
Environmental impacts, social acceptance & spatial planning
PO014: Multi-sensor detection systems pave the way for automated monitoring of bird behaviour in offshore wind farms
Henrik Skov, Senior Ecologist, DHI
Environmental impacts, social acceptance & spatial planning
PO015: Ice load portal for preliminary design of offshore wind turbines in the Gulf of Bothnia - case studies
Dr. Jaakko Heinonen, Principal Scientist, VTT Technical Research Centre of Finland Ltd
Environmental impacts, social acceptance & spatial planning
PO016: Real time hybrid model testing including complex aerodynamic loading for TRL+ project
Tommaso Battistella, Researcher, Environmental Hydraulics Institute of Cantabria (IHCantabria)
Floating offshore wind
PO017: An Innovative Low-Cost Deep-Water Wind Installation
Dr. Weimin Chen, PhD, General Manager, Wison Offshore & Marine
Floating offshore wind
PO020: PivotBuoy: Single Point Mooring wind turbine floating platform numerical modelling and verification
Alex Raventos, CEO & Co-founder, X1 Wind
Floating offshore wind
PO022: Design considerations for an articulated floating platform for offshore wind
Dr. Moti Keinan, Mechanical Engineer , RED
Floating offshore wind
PO023: Aerodynamic damping for accelerated numerical models for floating wind turbines
Antonio Pegalajar-Jurado, PhD, Post-Doctoral Researcher, DTU Wind Energy
Floating offshore wind
PO024: Systems Engineering for floating wind: Developing tools for integrated design and optimization
Frank Lemmer, Research Associate, University of Stuttgart (SWE)
Floating offshore wind
PO025: BlueSATH Project: 10MW Scaled Prototype Deployment in the Cantabrian Sea using innovative SATH Floating Wind Technology
David Carrascosa, CTO, Saitec Offshore Technologies
Floating offshore wind
PO026: Edgewise Vibration Control of Spar-Type Floating Offshore Wind Turbine Tower using SMA based Nonlinear TMD
Arunasis Chakraborty, Associate Professor, Indian Institute of Technology Guwahati
Floating offshore wind
PO027: Status and learnings from real world floating offshore projects
Jesper Moeller, Head of Offshore Balance of Plant Innovations , Siemens Gamesa Renewable Energy
Floating offshore wind
PO028: Floating maintenance taut wire system [Poster award winner]
Kuno van den Berg, Development & Proposal Manager, Vuyk Engineering Rotterdam
Floating offshore wind
PO029: DISTRIBUTION OF COSTS IN OFFSHORE WIND FARM PROJECTS
David Melo, Master Student, Federal University of Rio Grande do Norte
Floating offshore wind
PO032: Operations and maintenance modelling of floating hybrid systems
Dr Anthony Gray, EngD, Techno-Economic Analyst, ORE Catapult
Floating offshore wind
PO033: Meeting developer needs to deliver commercial scale floating wind: lessons from the oil and gas sector.
Lara Juergens, Senior Energy Analyst , EIC - Energy Industries Council
Floating offshore wind
PO035: Transitioning from oil and gas to renewable energy - an invaluable guide for SME's
Greg Campbell-Smith, CEng FIMechE , Director, First Subsea
Floating offshore wind
PO037: The trend of mooring systems and anchor type in the floating foundations of offshore wind turbines
Mario González, Researcher, Federal University of Rio Grande do Norte
Floating offshore wind
PO039: Mooring failure impact on dynamic cabling system – a risk mitigation case study
Peter Foxton, Engineering Manager, Vryhof
Floating offshore wind
PO040: Model predictive control of floating offshore wind turbine-generator systems based on preview of wind speed and wave height
Dr. Tetsuya Wakui, Associate Professor, Osaka Prefecture University
Floating offshore wind
PO041: Aero-hydro-servo-elastic simulations of a floating spar-buoy wind turbine using multi-body vortex method
Dr. Matias Sessarego, PhD, Post-doc, DTU Wind Energy
Floating offshore wind
PO045: High voltage dynamic export cables - overcoming the biggest barriers to the realisation of commercial scale floating wind farms.
Rory Shanahan, Manager, Offshore Wind, Carbon Trust
Floating offshore wind
PO046: Hydro-pneumatic energy storage: a tailored solution for floating offshore wind
Dr Daniel Buhagiar, PhD, Post-Doctoral Researcher, University of Malta
Grid development, storage, electrification and market integration
PO047: Tremendously Increasing the Wind Energy Efficiency - The Key to Hydrogen replacing Fossils
Adrian Rapas, CEO, WIND DAM
Grid development, storage, electrification and market integration
PO048: Research on transmission line planning of large scale offshore wind farm
Li Yan, Computational Fluid Dynamics Engineer , Mingyang Smart energy
Grid development, storage, electrification and market integration
PO049: Subsea cable management: Failure trending for offshore wind
Charlotte Strang-Moran, Electrical Engineer, ORE Catapult
Grid development, storage, electrification and market integration
PO050: DC vs AC, the battle continues
Thomas Worzyk, Senior Principal Engineer, NKT HV Cables
Grid development, storage, electrification and market integration
PO052: Optimal sizing and topological network optimization of cables in offshore wind farms
Nicolaos Cutululis, Professor, DTU Wind Energy
Grid development, storage, electrification and market integration
PO053: Kriegers Flak offshore wind – export cable installation
Kent Cronholm, MSc ME, Senior Installation Engineer, NKT HV Cables
Grid development, storage, electrification and market integration
PO054: State of the Art and Research Gaps in Wind Farm Control – Results of a recent workshop [Poster award winner]
Gregor Giebel, Senior Researcher, DTU Wind Energy
Grid development, storage, electrification and market integration
PO055: TotalControl - Advanced integrated control of large-scale wind power plants and wind turbines
Gregor Giebel, Senior Researcher, DTU Wind Energy
Grid development, storage, electrification and market integration
PO056: Regulation best practices for the development of the offshore wind market in Brazil
Andressa Santiso, MSc, Student, Federal University of Rio Grande do Norte
Grid development, storage, electrification and market integration
PO057: Current status and opportunities to be a major power source toward 2030 for offshore wind in Japan
Shota Ichimura, Senior Researcher, Renewable Energy Institute
Grid development, storage, electrification and market integration
PO058: North Sea region energy system towards 2050: offshore grid and sector coupling drive offshore wind installations
Dr. Matti Koivisto, Researcher, DTU Wind Energy
Grid development, storage, electrification and market integration
PO059: Impact Assessment of offshore wind power generation in United Kingdom
Adriana Figur Ribeiro, MSc, civil engineer
Grid development, storage, electrification and market integration
PO063: Gamification for improving health and building a common safety culture at Siemens Gamesa
Karin Borg, Head of Corporate HSE, Siemens Gamesa Renewable Energy
Health & safety and skills
PO065: The Wind of Change from a Human Capital Perspective. Is re-skilling workers from the Oil & Gas industry the solution?
Joost Pellis, Strategic Manager Renewables, Atlas Professionals
Health & safety and skills
PO067: Digital Twin – Supporting next level O&M Services
Steven Vettermann, Senior Consultant, PROSTEP AG
O&M, installation and logistics
PO068: Transparency between CTV vessel owners and farm operators - how sharing CTV vessel Key Performance Indicator data benefits all parties
Chris Huxley-Reynard, Managing Director, Reygar Marine Systems
O&M, installation and logistics
PO069: Determining offshore wind installation times using machine learning and open data [Poster award winner]
Bo Tranberg, PhD, Co-founder, Ento Labs
O&M, installation and logistics
PO072: Paving the way to future offshore wind development by compiling large scale metocean data and advanced statistical methods into a digital database
Maziar Golestani, Head of Department, DHI A/S
O&M, installation and logistics
PO073: Development of a Wind Turbine Gearbox Virtual Sensor using Multibody Simulation and Artificial Neural Networks
Baher Azzam, Research Scientist, Center for Wind Power Drives
O&M, installation and logistics
PO074: Transparent Deep Learning and Transductive Transfer Learning: A New Dimension for Wind Energy Research
Joyjit Chatterjee, PhD. Computer Science Student, University of Hull
O&M, installation and logistics
PO075: Wind Lidars Supporting Offshore Operations
Matthew Smith, Application Engineer, ZX Lidar
O&M, installation and logistics
PO076: An integrated risk-based integrity management solution for optimising operations
Allison Selman, Director, Atteris
O&M, installation and logistics
PO077: A decision-making tool for simulating and planning O&M activities of offshore wind farms
Pietro Tomaselli, PhD, M.Sc., Research Engineer, DHI
O&M, installation and logistics
PO078: Hydrodynamic simulations for CTVs in transit. SPOWTT: improving the safety and productivy of offshore wind technician transit
Msc Erik-Jan De Ridder, Teamleader RENT, MARIN - Maritime Research Institute Netherlands
O&M, installation and logistics
PO079: Leveraging accurate sea state data to enhance efficiency, mitigate risk and improve safety in offshore wind
Erik Salo, Research Associate, Miros
O&M, installation and logistics
PO080: AN INTEGRATED APPROACH FOR WIND FARM PERFORMANCE CONTROL AND MONITORING: THE RENVICO CASE
Ludovico Terzi, Technology Manager, Renvico srl
O&M, installation and logistics
PO081: Project logistics control centers. How much technology to be successful?
Petrus Bouwhuis, President & CEO, XELLZ B.V.
O&M, installation and logistics
PO082: Advanced tool to optimise the O&M activities for offshore wind farms
Raúl Guanche García, PhD, MsC, Head of the Offshore Engineering and Ocean Energy Group, Environmental Hydraulics Institute of Cantabria (IHCantabria)
O&M, installation and logistics
PO083: Improving Offshore Operations: How Next Generation Broadband Communication Changes The Game
Peter Slanina, Senior Expert, Atlas Professionals
O&M, installation and logistics
PO086: MEASURING LIGHTNING EXPOSURE FOR REDUCING WIND BLADE OPERATIONAL COST
Dr. Søren Find Madsen, PhD, Manager, Principal Engineer, PolyTech A/S
O&M, installation and logistics
PO087: Next generation touch down and catenary monitoring of high voltage power cables
Fabian Karlsson, Commercial Manager Vessels, NKT HV Cables
O&M, installation and logistics
PO090: Using Unmanned Aerial Vehicles (UAVs) for Offshore Wind Operation and Maintenance (O&M)
Mahmood Shafiee, Associate Professor (O&M), Cranfield University
O&M, installation and logistics
PO092: Continuous monitoring of the burial depth of submarine power cables
Manly Callewaert, Marlinks
O&M, installation and logistics
PO093: Remaining useful life prediction of a wind turbine drivetrain bearing
Prof. Yih-Hwang Lin, Ph.D., Professor, Department of Mechanical and Mechatronic Engineering - National Taiwan Ocean University
O&M, installation and logistics
PO094: The use of digital simulation technology to reduce the impact of an uncertain climate on offshore wind operations.
Edward Kay, MEng, JBA Consulting
O&M, installation and logistics
PO095: Numerical modelling of Spudcan penetration for offshore applications
Can Mollaibrahimoglu, Project Engineer, Swire Blue Ocean
O&M, installation and logistics
PO096: Port industry and its contribution for the implantation of offshore wind turbines
Mario González, Researcher, Federal University of Rio Grande do Norte
O&M, installation and logistics
PO097: Blade defect forecasting for the wind industry
Anders Røpke, CEO, Wind Power LAB
O&M, installation and logistics
PO098: Modelling and Optimising Offshore Wind Levelised Cost of Energy Based on Reliability and Maintenance Improvements
Dr. Cuong Dao, Research Associate, Durham University
O&M, installation and logistics
PO099: Impacts of reliability and cost uncertainties on offshore wind turbine operational simulation and cost of energy estimation
Dr. Cuong Dao, Research Associate, Durham University
O&M, installation and logistics
PO100: Floating installation on dynamic positioning of a 4m monopile using a combined vibro, lifting and upending tool
Robert Hasselaar, Engineer, DOT Power BV
O&M, installation and logistics
PO101: Offshore Demonstration of a Slip Joint
Jan van der Tempel, CEO, DOT Power BV
O&M, installation and logistics
PO103: Availability analysis for different offshore wind farm electrical connection topologies
Xiangyu Li, Post-doc Research Associate, Durham University
O&M, installation and logistics
PO104: Crew transfer vessel choice optimization based on yield-based availability of an offshore wind farm
Jorrit-Jan Serraris, Senior Project Manager, MARIN - Maritime Research Institute Netherlands
O&M, installation and logistics
PO105: Capturing synergies in operational offshore windfarms - A practical approach to OPEX optimization
Lars Nagstrup Conradsen, Founding Partner, PEAK Wind
O&M, installation and logistics
PO107: Wind profile usage in wind farm installation campaign simulations
Charlotte Obhrai, Associate Professor, University of Stavanger
O&M, installation and logistics
PO108: Summary of the Gravity based wind turbine foundation joint industry project(GBS WIND JIP)
Msc Erik-Jan De Ridder, Teamleader RENT, MARIN - Maritime Research Institute Netherlands
O&M, installation and logistics
PO110: Speeding up foundation installation by using motion compensation technology
Jurgen Zijlmans, Sales Manager, Royal IHC
O&M, installation and logistics
PO111: Quality Assurance with Drones for On- and Offshore Wind Turbines
Robert Hörmann, CEO/CTO, Aero Enterprise
O&M, installation and logistics
PO112: The Disruptive Potential for Service Operations Vessels to Drastically Reduce Access Based Operational Costs for Offshore Wind Farms
Miss Jade McMorland, PhD Student, University of Strathclyde
O&M, installation and logistics
PO113: Off-grid dehumidifier solution for protecting transition pieces against the affects of salt and moist air
Thomas Rønnow, CEO, Cotes A/S
O&M, installation and logistics
PO114: Distributed Fibre Optic Sensing selection handbook for power cable monitoring
Etienne Rochat, CTO, Omnisens SA
O&M, installation and logistics
PO115: ATOMS: a game-changer system for offshore wind large corrective maintenance. Bringing onshore means to the sea.
José Serna, CTO, Esteyco
O&M, installation and logistics
PO118: A comparative performance evaluation framework for power based wind turbine condition monitoring approaches
Usama Aziz, PhD Candidate, Université Grenoble Alpes, Valemo S.A.S
O&M, installation and logistics
PO119: Drivetrain fault detection of multi-megawatt offshore wind turbines by statistical learning
Farid Khazaeli Moghadam, PhD Candidate, Norwegian University of Science and Technology
O&M, installation and logistics
PO122: Legal Risks and Disputes in Wind Equipment Sea Transportation
Dr. Miquel Roca, PhD, Managing Partner, LMA Legal
O&M, installation and logistics
PO123: A robotic shearography system for wind turbine blade inspection on-site
Dr Jianxin Gao, Principal Project Leader, TWI Ltd
O&M, installation and logistics
PO124: The Power Performance Testing Results and Uncertainty Analysis For a 3 MW Offshore Wind turbine with Nacelle transfer Function
Keonhoon Kim, Ph.D., Principal Researcher, Korea Institute of Energy Research
Resource Assessment
PO126: Windcube classification: toward 0% standard uncertainty
Paul Mazoyer, Application Engineer, Leosphere
Resource Assessment
PO128: Long term comparison of spinner anemometer and nacelle lidar data for an offshore wind farm - Insights from the Performance Transparency Project (PTP)
Katrin Ritter, MSc, Wind Data Analyst, ROMO Wind A/S
Resource Assessment
PO130: Understanding remote sensor calibration uncertainties. The case of a nacelle-mounted pulsed LiDAR
Julien Tissot, Application Engineer, Leosphere
Resource Assessment
PO133: IEC 61400-50-3: standardisation of nacelle mounted lidar measurement for offshore wind turbine power performance verification
Rozenn Wagner, Senior Researcher, DTU Wind Energy
Resource Assessment
PO135: The influence of a nacelle based anemometer wind speed on the power curve evaluation
Anna Wegner, Research Assistant, Fraunhofer IWES
Resource Assessment
PO136: Train²Wind, or how large is an infinite wind farm?
Gregor Giebel, Senior Researcher, DTU Wind Energy
Resource Assessment
PO138: A comparison of various types of Floating Lidar Device’s turbulence intensity measurements compared to traditional cup anemometry
Matt Smith, Head of Sales, ZX Lidar
Resource Assessment
PO139: EOLOS FLS200 Test Case: accuracy and sensitivity analysis of the three-second gust and turbulence intensity when compared to an offshore met mast.
Adrià Miquel, Reliability Engineer, EOLOS Floating Lidar Solutions
Resource Assessment
PO140: Technological advancements and bankability of FLiDAR
Elie Gournay, Senior Wind Energy Yield Analyst, Mott MacDonald
Resource Assessment
PO142: IEA WIND TASK 36 FORECASTING – PHASE II
Gregor Giebel, Senior Researcher, DTU Wind Energy
Resource Assessment
PO143: DEVELOPING MULTI POINT CUMULATIVE SEMIVARIOGRAM (MPTSV) METHOD FOR SPATIAL FORECAST OF OPERATING WINDFARM VARIABLES
Dr Murat Durak, Managing Director, Enermet Energy AS
Resource Assessment
PO144: Tropical cyclones modelling with WRF-AHW
Dr. Jesper Nissen, Ph.D, Senior Meteoroligical Engineer, DHI
Resource Assessment
PO145: Extrapolating wind field a hub height from Synthetic Aperture Radar and ensemble of Weather and Research Forecasts wind estimates
Mouhamet Diallo, Post Doctoral researcher, CEREA Laboratory
Resource Assessment
PO146: The new frontier in numerical metocean modelling: coupled high-resolution atmosphere wave interactions [Poster award winner]
Remco Verzijlbergh, Director of Operations, Whiffle
Resource Assessment
PO149: Offshore wind resource mapping of the European Seas for the New European Wind Atlas
Dr. Charlotte Hasager, Senior Scientist, DTU Wind Energy
Resource Assessment
PO150: Improved ocean wave conditions for the design of offshore wind farms using data assimilation
Natacha Fery, PhD, Metocean Engineer, DHI
Resource Assessment
PO151: Spectral correction to recover full 10min variability from hourly mesoscale data
Lasse Svenningsen, PhD, R&D Manager, EMD International A/S
Resource Assessment
PO152: Coastal wind measurements using a dual scanning LiDAR system
Susumu Shimada, Researcher, AIST
Resource Assessment
PO153: Leading edge erosion: precipitation measurements offshore
Anna-Maria Tilg, MSc, PhD Student, DTU Wind Energy
Resource Assessment
PO156: Uncertainty of spinner anemometer wind speed measurements
Paula Gómez, Senior Development Engineer, DTU Wind Energy
Resource Assessment
PO157: Hub-height wind resource estimation based on year-round met mast and short-term LiDAR observations
Takumi Tsuji, Graduate Student, Kobe University
Resource Assessment
PO158: Upper-level wind resource assessment over Japan for airborne wind turbines
Ikui Lin, Student, Kobe University
Resource Assessment
PO160: Linking calculation of wakes from offshore wind farm cluster to the Danish power integration system [Poster award winner]
Xiaoli Larsén, Senior Scientist, DTU Wind Energy
Resource Assessment
PO164: Temporal Wake Modeling, Validation with iSpin Measurement and production data at Offshore Windfarm
Henrik Pedersen, Senior Wind Energy Consultant, EMD International A/S
Resource Assessment
PO165: The OWA wake modeling challenge blind tests
Javier Sanz Rodrigo, Senior Researcher, CENER
Resource Assessment
PO166: Measuring effects of the Borkum Riffgrund 1 wind farm on FINO1 by means of long range lidar
Dr. Juan José Trujillo, Project Engineer, UL International
Resource Assessment
PO170: Wind Offshore seals – trends and limitations for size and life time?
Marcel Schreiner, Global Sales Director Segment Energy, Freudenberg Sealing Technology
Turbine technology
PO171: Update on the project Integrated Implementation of Industrial Innovations for Offshore Wind Cost Reduction – an EU funded project
Jesper Moeller, Head of Offshore Balance of Plant Innovations , Siemens Gamesa Renewable Energy
Turbine technology
PO172: Application and applicability analysis of scanning lidar in power curve test of offshore wind turbine
Libing Zou, Deputy Chief Engineer of Mingyang Wind Energy Research Institute , Mingyang Smart energy
Turbine technology
PO175: Impact and pushover analysis for jacket wind turbine foundation
Dong Ma, Engineer, Mingyang Smart energy
Turbine technology
PO176: Advanced methods to analyze Gravity Base Foundations hydrodynamics
Raúl Guanche García, PhD, MsC, Head of the Offshore Engineering and Ocean Energy Group, Environmental Hydraulics Institute of Cantabria (IHCantabria)
Turbine technology
PO177: Output based methods for in-situ fatigue monitoring for design optimization and life time extension of monopile foundations
Maximilian Henkel, MSc., Doctoral Researcher, Accoustics & Vribration Research Group - Vrije Universiteit Brussel
Turbine technology
PO178: An overview of in-situ monitoring results on site specific damping for closing the feedback-loop between measurements and design of bottom fixed foundations.
Christof Devriendt, Scientific Coordinator OWI-lab, OWI-lab/ Vrije Universiteit Brussel
Turbine technology
PO179: Monopile lateral pile-soil interaction calibration from longterm in-situ monitoring data
Bruno Stuyts, Researcher, OWI-lab / Vrije Universiteit Brussel
Turbine technology
PO181: Installation of MP’s with Vibratory Hammers reduces installation time significantly
Martijn Schols, Director Sales International, Dieseko Group b.v.
Turbine technology
PO182: New type of suction buckets – experiences from testing a full-scale bucket
Jesper Moeller, Head of Offshore Balance of Plant Innovations , Siemens Gamesa Renewable Energy
Turbine technology
PO183: Offshore installation and testing of a slip joint connection between monopile and wind turbine tower
Thijs Kamphuis, Msc, Project Engineer & Lecturer, DOT B.V.
Turbine technology
PO185: Improved fatigue life of welded jacket connections
Dr James Sinfield, Technology Manager, Carbon Trust
Turbine technology
PO187: Investigation of pitting in steel below the corrosion layer from decommissioned suction bucket using X-ray tomography
Søren Fæster, Senior Researcher, DTU Wind Energy
Turbine technology
PO188: Characterisation of the Offshore Precipitation Environment to Help Combat Leading Edge Erosion in Wind Turbine Blades
Robbie Herring, EngD Student, ORE Catapult
Turbine technology
PO189: Lubricant Formulation – Its influence on Copper Alloy Corrosion in Wind Turbine Gearboxes.
Ulf Rieper, MSc Mechanical Engineering , OEM Manager Europe, Shell
Turbine technology
PO190: Case study of pitch bearing performance review under individual pitch control based on SCADA data from 7MW turbine
Mr Wooyong Song, BSc, Senior Research Engineer, Bearing, ORE Catapult
Turbine technology
PO191: Investigation of Loads on the High Speed Shaft Wind Turbine Gearbox Components Considering Misalignments
Alexander Krause, M.Sc., Research Assistant, Chair for Wind Power Drives, RWTH Aachen University
Turbine technology
PO192: Constructing fast and accurate analytical models for main-bearings in wind turbines
James Stirling, MEng, PhD Student, University of Strathclyde
Turbine technology
PO193: Mitigating extreme loads on turbines during grid loss
Konstanze Kölle, PhD, Research Scientist, SINTEF Energy Research AS
Turbine technology
PO194: Developing Blade Leading Edge Protection (LEP) Systems
Dr Kirsten Dyer, Senior Research Engineer, Materials, ORE Catapult
Turbine technology
PO195: Repair and protection of wind turbine blades: Computational modelling
Leon Mishnaevsky Jr., Dr. habil. , Senior Researcher, DTU Wind Energy
Turbine technology
PO196: On motion reduction control of offshore wind turbine by using multiple tuned liquid dampers
Bang-Fuh Chen, Professor, National Sun Yat-sen University
Turbine technology
PO197: Leading edge erosion the state of the art research results
Dr. Charlotte Hasager, Senior Scientist, DTU Wind Energy
Turbine technology
PO198: Load analysis for the design of plain bearings for use as main bearings in wind turbines
Alexander Krause, Research Scientist, Chair for Wind Power Drives, RWTH Aachen University
Turbine technology
PO199: Investigations on wear mechanisms in oscillating ball bearings
Peter Schönemeier, M.Sc., Scientific Assistant, Leibniz University Hannover
Turbine technology
PO203: Offshore Converters For Multimegawatt Wind Turbines
Alberto Barcia, Commercial Director, Ingeteam
Turbine technology
PO204: Generator Air Gap Sensitivity regarding Gravity, Wind Loads and Magnetic Pull of Direct Drive Wind Turbines
Abdul Baseer, M. Eng., Research Assistant, Center for Wind Power Drives
Turbine technology
PO205: The benefits of an upwind rotor swept area nacelle mounted lidar measurement and the detection of incoming wakes
Matt Smith, Head of Sales, ZX Lidar
Turbine technology
PO207: An Approach of Analyzing SCADA Data without Operating Status Applied on Turbine Performance Assessment
Pengyun Ji, Wind Resource Development Engineer, Shanghai Chiheng New Energy Co.,Ltd
Turbine technology
PO209: Field demonstration of integral load measurements tailored to advanced offshore wind turbine blades
Nora Denecke, MSc., Head of Department Field Measurements, Fraunhofer IWES
Turbine technology
PO210: Influence of stiffening rings on the load distribution of pitch bearings
Amin Loriemi, Scientific Assistant, Chair for Wind Power Drives, RWTH Aachen University
Turbine technology
PO212: Important drivetrain design goals over the lifetime – a model based comparison of on- and offshore application
Freia Harzendorf, Research Assistant, Chair for Wind Power Drives, RWTH Aachen University
Turbine technology
PO213: Quick Wind Turbine Load Evaluation Based on a Linear Model
Georg Raimund Pirrung, PhD, Researcher, DTU Wind Energy
Turbine technology
PO214: Enhanced Added System Damping Evaluated by Full-Scale Wind Turbine Testing
Mads Damgaard, PhD, Specialist, MHI Vestas Offshore Wind
Turbine technology
PO215: Reducing uncertainty in offshore wind speed and turbulence intensity profiles to optimise turbine system design
Gus Jeans, Director, Oceanalysis Ltd
Turbine technology
PO216: Structural validation of a recyclable thermoplastic composite wind turbine blade [Poster award winner]
Ryan Beach, Mechanical Engineer, National Renewable Energy Laboratory
Turbine technology
PO217: Limitations of legacy certification standards and potential benefits of new standards demonstrated on a representative 100m blade
Christopher Harrison, PhD, Principal Engineer, DNV GL
Turbine technology