Sessions
Science & Research Symposium
Science & Research
When: Wednesday, 27 November 2019, 14:00 - 18:00
Where: A12
Session description
Organised in partnership with the European Academy of Wind Energy (EAWE), the science and research symposium will feature science & research presentations in the areas of:Environmental impacts and maritime spatial planning; Grid integration of offshore wind; Blades; Bearings; and Foundations. The presented material has been selected for publication in a special edition of the Wind Energy Science journal
Session chair
Wei He
Principal Engineer, Equinor ASA
Nicolaos Cutululis
Professor, DTU Wind Energy
John Korsgaard
Senior Director - Engineering Excellencee, LM Wind Power
Simon Watson
Professor of Wind Energy Systems, TU Delft
Mareike Collmann
Operations Manager of the Test Centre for Support Structures, Leibniz University Hannover
14:00 - Part 1 - environmental impacts and spatial planning
Presentations
.
14:05 - Model testing of a multi-use North Sea farm; combining offshore wind turbines with floating solar panels and seaweed farming.
Floor Spaargaren
Project Manager, MARIN - Maritime Research Institute Netherlands
14:20 - Automatic Intelligent Eagle Detection, Deterrent and Blade-Event Monitoring
Roberto Albertani
Professor, Oregon State University
14:35 - Multi-sensor detection systems pave the way for automated monitoring of bird behaviour in offshore wind farms
Henrik Skov
Senior Ecologist, DHI
14:50 - Part 2 - Grids
Presentations
.
14:55 - Subsea cable management: Failure trending for offshore wind
Charlotte Strang-Moran
Electrical Engineer, ORE Catapult
15:10 - North Sea region energy system towards 2050: offshore grid and sector coupling drive offshore wind installations
Matti Koivisto
Researcher, DTU Wind Energy
15:40 - Part 3 - Blades
Presentations
.
15:45 - Characterisation of the Offshore Precipitation Environment to Help Combat Leading Edge Erosion in Wind Turbine Blades
Robbie Herring
EngD Student, ORE Catapult
16:00 - Developing Blade Leading Edge Protection (LEP) Systems
Kirsten Dyer
Senior Research Engineer, Materials, ORE Catapult
16:15 - Structural validation of a recyclable thermoplastic composite wind turbine blade
Ryan Beach
Mechanical Engineer, National Renewable Energy Laboratory
16:30 - Limitations of legacy certification standards and potential benefits of new standards demonstrated on a representative 100m blade
Christopher Harrison
Principal Engineer, DNV GL
16:45 - Part 4 - Bearings
Presentations
.
16:50 - Constructing fast and accurate analytical models for main-bearings in wind turbines
James Stirling
PhD Student, University of Strathclyde
17:05 - Case study of pitch bearing performance review under individual pitch control based on SCADA data from 7MW turbine
Wooyong Song
Senior Research Engineer, Bearing, ORE Catapult
17:20 - Part 5 - Foundations
Presentations
.
Session chair
Mareike Collmann
Operations Manager of the Test Centre for Support Structures, Leibniz University Hannover
17:25 - Monopile lateral pile-soil interaction calibration from longterm in-situ monitoring data
Bruno Stuyts
Researcher, OWI-lab / Vrije Universiteit Brussel
17:40 - Edgewise Vibration Control of Spar-Type Floating Offshore Wind Turbine Tower using SMA based Nonlinear TMD
Arunasis Chakraborty
Associate Professor, Indian Institute of Technology Guwahati
17:55 - Systems Engineering for floating wind: Developing tools for integrated design and optimization
Frank Lemmer
Research Associate, University of Stuttgart (SWE)