November 2026

WindEurope Bulletin

November 2026

18 November 2026

A message from the CEO

Dear WindEurope member,

I hope you’re keeping well. As we look back on a turbulent year for energy security, I wanted to quickly share a few thoughts on where we stand.

At the WinWin Summit in Brussels earlier this month, we exchanged views with European Commission President von der Leyen. Her message was crystal clear: “The future is electric.” She’s right of course. The more electricity we use, the less fossil fuels we import. Electrification has gone from being an academic aspiration to Europe’s first line of defence.

But what we do now will make all the difference. In our exchanges with Executive Vice-President Ribera and Commissioner Hoekstra, we flagged three priorities:

  1. Execute, execute, execute: Let’s deliver on the legislation and commitments already in place.
  2. Give investors long-term certainty through a binding EU renewables target for 2040 and beyond. You can read more about this here.
  3. Accelerate electrification across industry, transport and heating, ensuring renewable electricity can meet growing demand.

As Ministers meet across Europe and at COP 31 this week to discuss our energy future, it’s vital that we stress again: energy security means producing more energy here at home. Renewables and electrification must advance together, backed by grids, storage and infrastructure. Europe has a winning formula: let’s stick with it.

We have the factories, skills and industrial capabilities to make it happen. Now we need to put them to work and build the turbines Europe needs.

As always, thank you for your continued input and everything you’re doing to move Europe forward.

Kind regards,

Tinne Van der Straeten

CEO, WindEurope

EoLIS 2026 – Last chance to register!

On 24 and 25 November, 300+ experts from industry, academia, government, investors and the sustainability community will meet at EoLIS 2026 in Bilbao, Spain to hear the latest answers to this central question: what do we do with our old wind turbines?

What can you expect at EoLIS?

  • 15+ sessions on repowering, lifetime extension, decommissioning, circularity, reuse strategies and recycling – with case studies and market developments. Check out the full programme.
  • A strengthened focus on offshore end-of-life, including four dedicated sessions.
  • A chance to unwind with your peers: including at a special dinner at the Sociedad Bilbaina, a taste of iconic Basque cuisine in an historic setting!

We hope you’ll join us in two weeks for a chance to share ideas, build connections, and help determine the future of Europe’s ageing wind fleet.

Register now

Members’ Successes

Afterwind’s First Strategic Acquisition to Expand On-Site Wind Turbine Blade Cutting Capabilities

Afterwind

Afterwind has completed its first strategic acquisition with the purchase of selected assets from the bankruptcy estate of Advantis A/S in Denmark, marking an important milestone in the company’s long-term strategy to build a leading European Circular Advanced Materials Platform for composite assets.

The transaction includes Advantis’ proprietary wind turbine blade cutting equipment, intellectual property, patents and associated technology. Together, these assets strengthen Afterwind’s technology platform while expanding its operational capabilities for industrial-scale composite recycling and on-site servicing of large composite structures.

The technology builds on years of engineering and technology development by the Advantis team, supported by European innovation funding, and laid the foundation for the blade cutting technology and intellectual property now being integrated into Afterwind’s platform. By preserving and further developing these innovations, Afterwind aims to accelerate their commercial deployment as part of its industrial-scale circular solutions for composite recycling.

By integrating these capabilities into its operations, Afterwind adds the ability to perform on-site wind turbine blade cutting and sectioning of other oversized composite structures, enabling more efficient recovery, transportation and recycling of materials. This further strengthens the company’s ability to support wind farm owners, OEMs and industrial partners throughout the entire value chain—from asset recovery and logistics to the production of fully traceable Circular Advanced Materials.

The transaction also establishes Afterwind’s presence in Denmark, expanding the company’s footprint across the Nordic region and bringing its circular solutions closer to customers and partners. More broadly, it reflects Afterwind’s long-term strategy of combining proprietary technology with targeted acquisitions to accelerate innovation and expand its Circular Advanced Materials Platform.

Wind turbine blade cutting is much more than simply reducing blade size—it’s the foundation for preserving material value and enabling efficient downstream recycling” said Julia Minici, CEO of Afterwind. “We’re proud to build on the engineering innovation behind this technology and continue it development at Afterwind. Expanding our capabilities means we can offer more integrated solutions to our customers and partners while accelerating the transition to a circular composites industry.”

The technology and equipment will be integrated into Afterwind’s operations over the coming months, further expanding the company’s service offering for large-scale composite recovery projects and supporting the continued growth of its Circular Advanced Materials Platform.

More on Afterwind

Eco-engineered scour protection completes multi-year validation for offshore wind

ECOncrete’s

ECOncrete has completed a multi-year program validating its eco-engineered scour protection for offshore wind. Combining physical model testing with nearly four years at sea, the results add to the evidence that nature-inclusive solutions meet offshore engineering standards while addressing habitat and biodiversity objectives. The data is now available to support offshore wind projects.

The ECOncrete scour protection units are designed to replace or complement conventional rock armor. Made from bio-enhancing concrete with textured surfaces and interlocking geometry, they form a porous armor layer with crevices and sheltered spaces where marine life can settle, building habitat into the scour protection itself.

Engineering performance was established through 3D physical model testing in wave basins at UPM Madrid, Ghent University and the Technion, around a monopile on hard and soft seabeds under combined wave and current loading. The units showed hydraulic stability comparable to standard rock armor with lower armor-layer mass owing to their higher porosity and lower density, and no winnowing was observed beneath them in any tested configuration. Full-size drop and overturning tests, simulating handling and installation, recorded negligible or no damage.

In late 2022, approximately 4,500 locally manufactured units were deployed at around 40 meters depth at Twelve Mile Reef in the New York Bight, USA, a test site chosen because its conditions closely resemble those of planned offshore wind farms, including the North Sea. An equal volume of conventional rock placed 100 meters away served as a control.

Researchers from Stony Brook University, funded by the New York State Energy Research and Development Authority (NYSERDA), monitored both installations and published their final report in September 2026. Repeated multibeam surveys tracked the installation and surrounding seabed through storms with modeled wave heights approaching eight meters. Fish sampling in October 2024 recorded higher fish diversity at the ECOncrete installation than at the rock control. ROV footage from May 2026, three and a half years after installation, showed dense blue mussel colonization between the units, with American lobster, crab, ocean pout and red hake using the openings and crevices within the armour layer.

The units are designed for fast mass production by local precast manufacturers using standard dry-cast methods, with a single production line able to produce thousands of units per day, and for installation with standard scour-protection vessels and equipment. They can also be used in protection and stabilization designs for cable protection systems.

ECOncrete’s ambition is for ecological performance to become a standard part of offshore infrastructure design as European offshore wind moves nature-inclusive design from pilot to implementation at scale.

More on ECOncrete

Member Interview: Flender

This month, we spoke to Tommy Rahbek Nielsen, Wind President at Flender, to discuss their decades of drivetrain expertise, the need for faster action on grids, permitting and innovation, and their technological ambitions.

 

Read interview

Statkraft: 100 years of harnessing nature

Statkraft

Statkraft is one of Europe’s largest producers of renewable energy, and they’re on a mission to accelerate your decarbonisation journey.

For more than 100 years Statkraft has harnessed some of nature’s strongest elements. What started with Norwegian hydropower has expanded to wind and solar power across 20 countries in the Nordics, Europe and South America.

As Europe’s largest producer of renewable energy and a leading energy transition trader, we help shape a clean, secure and sustainable energy system. Because as wind and solar generation grow, so does the need for flexibility – making flexible assets, optimisation and effective market access increasingly important.

Your partner for long-term green power

Our offering spans tailor-made renewable and hybrid PPAs, flexibility offtake and optimisation, route-to-market services, and standard and structured hedging products across long- and short-term markets. For large energy consumers and retailers, our solutions and services support their hedging and consumption needs.

For generators and flexibility providers, we help manage risk and support revenue predictability and bankability, complemented by physical optimization services across short-term energy markets.

A better kind of power

Statkraft has always believed in a better kind of power. A power that renews itself, and in turn, renews the world.

As a long-standing strategic partner of RE-Source, we look forward to exploring how our energy solutions can meet the evolving needs of generators, flexibility providers and energy consumers across Europe.

More on Statkraft

WindEurope events

WindEurope Technology Workshop – Submit your abstracts!

WindEurope’s Technology Workshop returns on 10–11 June in Vilnius, Lithuania, bringing together 450+ wind specialists to discuss wind resource assessment and operating wind farm analysis. Our call for abstracts is now open: a chance for you to shape the programme and advance industry knowledge.

Submission guidelines

  • Topics: Choose one of the prescribed topics for correct scoring.
  • Originality: Please submit new, unpublished work.
  • Contribution: Should include data or results that advance sector knowledge.
  • Content: Commercial submissions will be rejected.

Make sure to submit by Friday 29 January; the earlier the better! Visit the event website for details. We look forward to your contribution!

Submit your abstract